|
|
Tarfumes.com - JET JW1317 4" Wire Hose Clamp - Each
|
List Price: $2.36
Our Price: $2.36
Availability: Usually ships in 24 hours
Manufacturer: JET
|
Average Customer Rating:  
|
|
Binding: Tools & Hardware
Brand: Jet
EAN: 0662755770067
Feature: Wire hose clamp connects flexible piping to dust hoods, blast gates, and fittings
Label: JET
Manufacturer: JET
Model: JW1317
Publisher: JET
Studio: JET
|
|
|
Features
|
Wire hose clamp connects flexible piping to dust hoods, blast gates, and fittings
Wire hose clamps
4-inch-diameter
|
|
|
|
|
|
|
|
|
Editorial Reviews:
|
The Jet 4-Inch Wire Hose Clamp connects flexible piping to dust hoods, blast gates, and fittings. These 4-inch-diameter wire hose clamps come in a pack of two.
|
|
|
Spotlight customer reviews:
|
Customer Rating:
Summary: Its a Clamp
Comment: Um, its a clamp. It holds things tight. Sorry I can't really write a paragraph on a hose clamp. It does what its supposed to do, and it does it well.
Customer Rating:
Summary: Great Clamp!
Comment: I used a whole lot of these when I set up my dust collection system, and I can say that the hype is justified. These thin metal clamps slip between the ridges on the flex hose perfectly to create a very air-tight connection. I also appreciate the phillips head on the tightening bolt - it makes it a lot easier to crank these down quickly with a drill/driver.
A word of advice - I found these clamps to be A LOT cheaper at Menards.
Customer Rating: 
Summary: Looks like the price is back down to $1
Comment: I see that Amazon lowered the price back down to $1. At the time of my original review, they price was up around $4...hence the 1 star. The product itself works as advertised, so I give it 5 stars.
Customer Rating:
Summary: Works better than hose clamps
Comment: These clamps work well on ventilation hose that you would use in a dust collection system. They are much cheaper and they clamp tight. Regular hose clamps slip because of the ribs in the hose.
Customer Rating:
Summary: Excellent Permanent Clamp
Comment: I recommend these clamps to anyone who needs to permanently clamp their 4" hose to an outlet, adapter, inlet, etc. They form a good tight seal and do not fall off once properly tightened down.
I would not recommend these type clamps for an application where you would be moving the hose to different tools or positions. Reason being, one you would have to get your screw driver or socket wrench out, and two because the wear and tear of the clamp tightening on the hose over and over again would eventually wear a hole in the hose.
|
|
|
|
|
|
|
|
|
